Use free Ptcl internet and ptcl speed

As you all know the PTCL Broadband gives a Router ( some call it Modem) from which we connect to the Internet. What exactly this Router is that it contain the settings about connecting the Internet.

Routers have 2 ports open:

1. ftp port       80

2. telnet port    23

default user name and passward are:

User name : admin or user

Password : admin or user

STEP 1: Finding the IP address.

If you are chatting with your friends on facebook or yahoo or any other messenger

then

close all application except chat

then chat with him/her 2 mins

then Goto Start ---> run ---> Cmd type netstat -an

it will trace ur friend ip

or another method to trace someone ip

goto http://www.whatismyip.com/

here u got ur ip

suppose i got my ip  182.177.252.166 than I would scan from 182.177.252.1 to 182.177.252.250 . Because we connect the Internet with Dynamic IP addresses it means that nearby IP address would also be PTCL Broadband users. 

STEP 2: Connecting to Telnet or Http Server.

Connecting to Telnet server: Well now when we have the IP address just goto start => RUN then type cmd.exe in it. and following screen will appear . Then type following into it telnet {IP ADDRESS}.

NOTE:

The Default User name is: admin

The Default Password is: admin

or

User name is : user

Password is : user

now:

Router configuration will open..  you can change all settings

Connecting to Http server: Well all the steps are same but this time you use your browser to access the  router like show below.

NOTE:

The Default Username is: admin

The Default Password is: admin

and after that:

now you are in his router.

First go to advance setup.

check the ips which are using Internet

then goto Nat option

there select Pvc(7)

then go in Dmz host

there place ip and click save

now traffic from Internet goes directly to that PC and it got public private ip

then go in run type

the directory C: of that pc will open asking for user name and password

you can easily crack that user name and password by using software HYDRA;

USE GOOGLE DNS sever 8.8.8.8 and 8.8.4.4

and